Product feature ：
This machine is made of best alloy steel as main material .The structure adopts the square rods and pressing screw to compose the pressing chamber,which is the more advanced oil processing machinery .

This machine have below obvious feature：
1. High oil yield（the rate of the outlet oil >94%），Residual oil of the Cake is very less,the oil dregs is less,and the crude oil is very clear.
2. The machine’s casting and steel is  the higher quality, the accessories is enough hard after quenching conditioning treatment, wear resistance and long service life.
3. The gear box's gears adopts the special helical & coupling gear design , less consumption, low noise.


Suitable for the material
  Suitable for Physical squeezing all kinds of vegetable oil material ,such as soybean ,cottonseed ,peanut, rapeseed, sunflower, teaseed ,copra ,Gendarmerie seed and palm kernel etc.

 Especially suitable for squeezing un-hulling peanuts, rice bran, cottonseed,etc.


Main data

Model

YS-130T

YS-160T

YS-180T

Outsize (mm)

1630*490*1210

1960*620*1420

1980*680*1480

Weight(kg)

480

700

800

Power( kw)

5.5-7.5

15-18.5

18.5

Residual oil in meal:

< 6%

< 6%

< 6.5%

Capacity(kg/h)

200-300

500-600

750-850

 

The others data 

Oilseeds

Canola 

Peanut

 seeds

sesame

cotton

seeds

 Soy    

Copra

Sunflower 

Tea

seeds

Maize 

embryo

Jahpaseeds 

castor

 seeds

Rate of 

output oil 

(%)

33~38

38~45

42~47

30~33

11~20 

55-63

35-45

25-30

35-45

50-60

 40-50

 Remark   

1.The technical parameters of the table refers to matching the cleaning, peel, flaking, steaming and roasting 

accessories equipment, etc, normal operation, and adopts the hot pressing method to achieve the indicators.

2. Since the difference of raw materials on oil varieties, qualities and oil contents, as well as the working conditions,

 the actual outcome may be a little different from that shown in the chart.

3. Raw material feeding (t/24h) refers to the capacity after once hot press, and it would reduce to half of it if twice 

and one third if three times. And so forth, the more times of hot press, the fewer raw materials feeding it would be.

4.The machine meets the JB/T9793.1-1999  "agricultural screw oil press technology conditions", and Implement  the national regulations of Warranty Services policy of P.R. China.