Product feature：

This model is the patented product improved by our factory,which is the  more  advanced in the veg. oil processing machinery, ith the characteristic of the simple structure, easy operation, energy saving, low noise, high rate of oil, adaptability and continuous operations.

Main feature
1.High oil yield（the rate of the outlet oil i>93%），Residual oil of the cake is less, the crude oil is very clear.

2.The material quality of machine is best, the accssories are wear resistance and long service life after quenching conditioning treatment.

3.The gear box's gears adopts the special helical & coupling gear design, with the low load ,the  less consumption and the low noise.

4. The bigger once pressing capacity ,which is the biggest in the once pressing machines .

Suitable for the material

  Suitable for physical  Squeezing all kinds of vegetable oil material , such as soybean ,cottonseed , peanut,  rapeseed, sunflower, teaseed , coconut dry ,Gendarmerie seed and palm kernel etc.


Main data

Mode

Capacity  

(t/24h)

power(kw)

Residual oil 

of  Cake

Size(mm)

YS-180/

ZX168

18-20

30/37+1.5 

< 7%

2550*810*1960

YS-200

once pressing:25-30

Main: 37/45

Feeder:1.5 

< 7%

        2700*1000*2700 

Pre-Pressing:30-40

<14%

 

The data of the conveyor matched：

Model 

Capacity （T/24hour）

Power(kw)

Size

TLSS16

1-5 

1.5-2.2

Ø160×2500mm 

The others' Data

Oilseeds

Canola 

Peanut seeds

sesame

Cotton eeds

Soy 

Copra

Sunflower 

Tea seeds

Maize bryo

Jatropha  eeds

castor eeds

Rate of output oil (%)

33～38

38～45

42～47

30～33

11～20

55-63

35-45

25-30

35-45

40-60

40-50

 
Remark:
1.The technical parameters of the table refers to matching the cleaning, peel, flaking, steaming and roasting , accessories equipment, etc, normal operation, and adopts the hot pressing method to achieve the indicators.

2. Since the difference of raw materials on oil varieties, qualities and oil contents, as well as the working conditions, the actual outcome may be a little different from that shown in the chart.

3. Raw material feeding (t/24h) refers to the capacity after once hot press, and it would reduce to half of it if twice and one third if three times. And so forth, the more times of hot press, the fewer raw materials feeding it would be.

4.The machine meets the JB/T9793.1-1999 "agricultural screw oil press technology conditions", and Implement the national regulations of Warranty Services policy of P.R. China.

5. Model specification: